The Antimicrobial coating protects surfaces from a range of viruses, bacteria, mould, algae, and odours. The coating also acts as a layer of protection for the surface itself, protecting against general wear and tear.
Our Antimicrobial coating does not use a chemical kill process, and therefore does not use or leach any harmful chemicals. Instead, the technology that our coating uses is a mechanical kill, once applied and dried, the coating creates a very thin, invisible layer of ‘nanospikes’ that penetrate the microbe it comes into contact with, destroying the cell.
The main difference between our Antimicrobial coating and a standard disinfectant is that our coating does not evaporate after being applied. It bonds to the surface and is effective for up to 90 days. It has been engineered not to allow or cause microbial adaption, resistance or mutation.
Our Antimicrobial coating can be applied to a variety of surfaces in a range of environments, including indoor and outdoor use, and in medical and food environments. It is most effective in high touch-point areas as it can dramatically reduce the risk of microbial transmission.
Our Antimicrobial coating is effective at reducing the risk of transmission to a range of bacteria, mould and fungi for up to 90 days.
Our Antimicrobial coating will not be removed by normal routine cleaning or disinfectants, it can only be removed with abrasion.
After a few minutes, the coating will be dry to touch but we recommend allowing 2 hours for the coating to completely bond to the surface it has been applied to.
Yes, there have been multiple tests done to prove the safeness and effectiveness of our Antimicrobial coating. It is non-flammable, solvent free, water-based and does not contain heavy metals, formaldehyde treatment, phenol groups or odour causing agents.
The active ingredient in the coating is ECHA (European Chemicals Agency) registered and compliant. Our Antimicrobial Coating is also ISO 21702, BS EN 14476, and BS EN 1276 accredited.
No, our Antimicrobial coating is an additional layer of protection that eliminates bacteria for up to 90 days. With this coating’s layer of protection, you are able to go back to pre-COVID, regular cleaning methods. Other precautions should also be taken alongside such as hand-washing, mask wearing, and temperature checks.
For a full bespoke quotation, talk to one of our team.
Protection & Retail Screens
For our standard retail protection screens, we can offer delivery within 5-10 working days, subject to stock levels. However, depending on product, order volume, and location of install (if applicable), delivery may take longer.
We have a range of protection and retail screens available, including sneeze guards, shop cashier screens and acrylic protection screens. All our shop protection screens are available in standard sizes and branding, but are fully customisable to your exact requirements.
We have a variety of standard sizing for our acrylic protection screens. For more details, please see our catalogue or shop. Although we have standard sizing available, we can also customise to whatever size you need.
Our retail protection screens are designed to be versatile in a whole suite of environments. They’re great in areas where human interaction is inevitable, by providing a safety barrier to protect all individuals. Use in offices, workplaces, hairdressers, hotels, gyms, salons, shops, supermarkets, leisure centres, restaurants, and pubs.
We have a selection of materials used to create our protection screens. Our T3 protection screens utilise the T3 modular system. Entailing aluminium beams and plastic connectors that simply twist and lock into place. Acrylic panels can be integrated into this framework. Alternatively, we have acrylic-only protection screens, that are both sturdy and effective.
Some of our protection screens come prebuilt. Alternatively, most of our protection screens are configured using the T3 modular system. Designed to be quick and easy to build, the T3 system requires no tools – just a twist and lock!
Thermal Cameras and Thermometers
Our thermal cameras use advanced cameras and sensors that translate thermal energy into visible light, in order to analyse an object.
Our thermal imaging cameras can be used to measure temperature, assessing whether the temperature is normal or too hot. It also uses advanced facial recognition and can detect if an individual is wearing a mask or not. Audio and visual prompts are activated when detecting a face. A staff database can also be uploaded to the thermal camera to allow logging and temperature checks of staff and visitors.
The thermal camera uses a range of cameras and sensors, combined with advanced algorithms, to detect and calculate specific demands. It can connect to a network via an ethernet cable or wireless LAN.
The thermal imaging camera can detect an object up to a distance of 1.2m.
For the thermal camera to work and detect an object, the object needs to be in-between 0.3m-1.2m distance away.
The thermal imaging camera stores data including snapshot images (stored as JPEGS), temperature, mask attributes, and staff ID (if set up). The data stored in the Thermal Camera can be accessed through the provided software, or exported as a CSV file.
You will receive your thermal camera within 7-14 days from point of purchase. However, we may be experiencing slight delays due to COVID-19.
The thermal camera can be used outside during the day, but cannot be used in direct sunlight.
The thermal device has a 99.9% facial detection success rate. When checking temperature, the thermal camera has an accuracy of +/- 0.2 of a degree.
The thermal camera can be plugged into a mains power supply.
Our sanitiser units come prebuilt so you don’t need to worry about building.
Our sanitiser units can hold a 1L capacity of sanitiser liquid.
As standard, our sanitiser units come without sanitiser liquid. But upon request, we can supply sanitiser liquid.
Our sanitiser units come in a range of sizes under 2m, and can also be customised to any height. Our sanitiser units have an easy to adjust height function.
We have both automatic and manual sanitiser dispensers available. Please let us know upon request which one you’d like.
Our sanitiser stands are manufactured with a strong, steel post and base. And for signage on the sanitiser stand, we use premium 5mm acrylic. Our sanitiser stands have been designed and manufactured with materials that can both be used indoors and outdoors for maximum usage.
Our desk partitions are easy to assemble and require no tools to build. Alternatively, our team are here to help by building and installing your desk dividers on site.
For our standard desk dividers and desk screens, we can offer delivery within 5-10 working days, subject to stock levels. However, depending on product, order volume, and location of install (if applicable), delivery may take longer.
Our standard office desk screens are 0.8m wide, 1m wide, and 1.2m wide. However, we can also customise your desk dividers to any size that fits your requirements.
To ensure the office desk dividers will fit in your chosen environment, we do request dimensional information upon order. Alternatively, we offer full site surveys to identify any complications, give expert advice, and accurately measure your space. Get in touch to find out about our site surveys.
The materials we use for our desk screens are a combination of sturdy aluminium framework, teamed with either premium acrylic, strong Foamboard, or our hard-wearing ACM (aluminium composite material). All designed to have maximum durability and easy-cleaning properties, to ensure a safe working environment for your staff.
Freestanding Walling and Partitions
Our freestanding partitions are very easy to build, requiring no tools. Our range has been created using the T3 modular system, using components that simply twist & lock together. Our system has been designed so that you can build it with ease and in no time at all.
Our freestanding partitions are made using the T3 modular system. The system consists of lightweight, aluminium beams and plastic connectors, that simply twist and lock together to create unique configurations. As well as our standard supply of silver anodised, aluminium T3 framework, we also offer a range of coloured T3 Deco beams. We combine our system with either premium acrylic, strong Foamboard or ACM (aluminium composite material).
Our range of temporary wall dividers are available to rent directly from our warehouse in Farnborough. We recommend using our rental service for:
Temporary solutions | Lack of storage space, we can hold the stock in our warehouse | A cost-effective option
For our standard dividing screens, we can offer delivery within 5-10 working days, subject to stock levels. However, depending on product, order volume, and location of install (if applicable), delivery may take longer.
We have a range of standard modular walling available. Typically, these are 2m high x 1m and 1.5m wide. Whilst we have a range of standard sizes, we can also design and create custom sizes and solutions to suit your requirements.
All our dividing screens can be customised to suit your requirements. Whether you want different sizing, branding, graphics, materials, fixings, or more, we can do it. Get in touch to see how we can help.
To make sure the freestanding walls and partitions will fit in your chosen environment, we do request dimensional information upon order. Alternatively, we also offer full site surveys to ensure we can offer expert advice, identify any complications, and accurately measure your space. Get in touch to find out about our site surveys.